Non-Sparking Vise-Grip Locking Pliers – 10″ Curved Jaw

The Non-Sparking Vise-Grip Locking Pliers – 10″ Curved Jaw are 10 inches long and the jaws can open up to 40mm. They can grip objects from any angle. There is an adjustment screw at the bottom to control the strength of the grip.

This non sparking locking plier wrench has undergone special heat treatment to make it rust and corrosion resistant. It is heavy duty and withstands repeated use.

Available As

• Aluminum Bronze Vise Grip Pliers AL257D-1002
• Beryllium Copper Vise Grip Pliers BE257D-1002

For more information about these WEDO locking pliers, contact us today at +1 (805) 617 – 0987

Cal OES MEL List – Firescope Hazardous Materials Minimum Equipment List (MEL)

This product meets the requirements for the Firescope MEL List. To see all of the MEL products that HAZMAT Resource provides, visit our California MEL List page >>

Cal OES 13.3.11 NON-SPARKING PLIERS, LOCKING, VICE GRIP TYPE, KIT: To consist of any four of the following: Adjustable chain wrench, welding clamp, curved jaw locking, straight jaw locking, long nose locking, “C” clamp locking, sliding bar locking.

Two of these non sparking curved jaw locking pliers and two non sparking chain pipe wrenches will fully meet the requirements for this MEL.

This is optional for Type 1, Type 2, and Type 3 teams.

Non-Sparking Locking Pliers