Peroxide Test Strips 0-100 ppm

The Peroxide Test Strips 0-100 ppm are low level peroxide test strips that can detect residual peroxides in places where cleaners used Hydrogen peroxide as a disinfectant. Examples of where this chemical can be are drinking water, pools, and hot tubs. This test strip has undergone calibration at 0, 1, 3, 10, 50, and 100ppm, and gives results in just seconds.

These peroxide test strips for organic solvents have undergone calibration to provide accurate readings in float tanks, even with Epsom salt. The Bartovation peroxide test strips can test and provide a reading of peroxide, leaving float tanks sanitary and safe. Hydrogen Peroxide H2O2 Test Strips, Low Level, 0-100 ppm are fast and accurate.

How do peroxide test strips work?

The low range hydrogen peroxide test strips are stiff and white which allow for good color and easy reading. At the end of the strip is an indicator pad which reacts with hydrogen peroxide. If peroxide is present, the H2O2 test strip will change color which can then be compared with the chart to show actual amounts.

Instructions:

1. Remove one test strip from the vial. Do not touch the test pad with your fingers.
2. Dip the hydrogen peroxide test strip into the solution being tested for 1 second.
3. Remove and shake off any excess liquid.
4. Compare the test pad to the color chart after 10 seconds.

Note: This Low Level Peroxide Test Strip, Up to 100 ppm, is designed for testing residuals, it is NOT for testing high range OR undiluted peroxides.

Hydrogen Peroxide H2O2 Test Strips, Low Level, 0-100 ppm -Vial of 100 Strips

Need more information on how to use peroxide test strips?

For more information about the low level hydrogen peroxide test strips, contact us today at +1 (805) 617 – 0987

Cal OES MEL List –  Firescope Hazardous Materials Minimum Equipment List (MEL)

This hydrogen peroxide test kit meets the requirements for the Firescope MEL List. To see all of the MEL products that HAZMAT Resource provides, visit our California MEL List page >>

Cal OES MEL 1.1.4 TEST STRIPS, PEROXIDE

Requires 1 Packet each for Type 1, Type 2, and Type 3 teams.